NEAREST AIRPORTS

Anvik can be reached by flying into one of the following airports:

New York - LaGuardia Airport (LGA): 30 miles

New York - Kennedy Airport (JFK): 40 miles

White Plains (Westchester County) Airport (HPN): 10 miles

Driving directions from the above airports to Anvik are given below.

    REACHING ANVIK BY CAR

For any of the following driving directions, click on the appropriate link:

Driving from Tappan Zee Bridge

Driving from Boston

Driving from Northern Connecticut

Driving from Southern Connecticut

Driving from Points North

Driving from Points South

• From Airport Exit, look for “Parkway East.”
• Get on to Grand Central Parkway East.
• Take Exit for Whitestone Bridge. You are now going north crossing from Queens into The Bronx.
• After paying toll ($3.50), bear left. Get on to Hutchinson Pkwy.
• Take exit 13 for "Cross County Pkwy - To Saw Mill River Pkwy." You are now going west for a short distance (1/4 - 1/2) mile.
• From Cross County Pkwy, take Exit 6, which immediately splits into Sprain Brook Pkwy (right fork) and Bronx River Pkwy (left fork). Take the right fork for Sprain Brook Pkwy. Immediately after merging, bear left and get onto Taconic Pkwy (which later changes name to Sprain Brook Parkway). You are now going north again and crossing from The Bronx into Westchester County.
• Take exit for Route 100 C - Eastview. Turn left at top of exit ramp. You are now going west for a short distance (1/2 mile) on Rt. 100 C (also called Grasslands Rd).
• After the 3rd traffic light bear right and get on to Rt. 9A North.
• Go through one traffic light and immediately look on the right for IBM T.J. Watson Research Center sign and building (all glass, greenish, trapezoidal, tall blue pillar in the middle). There is also a sign here saying Mack-Cali Mid-Westchester Executive Park. Turn right at this junction. You are now on Skyline Drive and in a office-industrial complex of several buildings. Slowly follow this winding road to Building 6.

• From Airport Exit, get on to Van Wyck Expressway - North. (Van Wyck Expressway is also called Route 678).
• Stay on Van Wyck Expressway North and follow signs to Whitestone Bridge.
• Take Exit for Whitestone Bridge. You are now going north crossing from Queens into The Bronx.
• After paying toll ($3.50), bear left. Get on to Hutchinson Pkwy.
• Take exit 13 for "Cross County Pkwy - To Saw Mill River Pkwy." You are now going west for a short distance (1/4 - 1/2) mile.
• From Cross County Pkwy, take Exit 6, which immediately splits into Sprain Brook Pkwy (right fork) and Bronx River Pkwy (left fork). Take the right fork for Sprain Brook Pkwy. Immediately after merging, bear left and get onto Taconic Pkwy (which later changes name to Sprain Brook Parkway). You are now going north again and crossing from The Bronx into Westchester County.
• Take exit for Route 100 C - Eastview. Turn left at top of exit ramp. You are now going west for a short distance (1/2 mile) on Rt. 100 C (also called Grasslands Rd).
• After the 3rd traffic light bear right and get on to Rt. 9A North.
• Go through one traffic light and immediately look on the right for IBM T.J. Watson Research Center sign and building (all glass, greenish, trapezoidal, tall blue pillar in the middle). There is also a sign here saying Mack-Cali Mid-Westchester Executive Park. Turn right at this junction. You are now on Skyline Drive and in a office-industrial complex of several buildings. Slowly follow this winding road to Building 6.

• From Airport Exit, go through 1 major traffic light, and get on to I-684 South.
• Take I-287 West toward Tappan Zee Bridge.
• Take Exit 3 for Sprain Brook Parkway.
• Take the Left Fork for the Sprain Brook Parkway North.
• Take exit for Route 100 C - Eastview. Turn left at top of exit ramp. You are now going west for a short distance (1/2 mile) on Rt. 100 C (also called Grasslands Rd).
• After the 3rd traffic light bear right and get on to Rt. 9A North.
• Go through one traffic light and immediately look on the right for IBM T.J. Watson Research Center sign and building (all glass, greenish, trapezoidal, tall blue pillar in the middle). There is also a sign here saying Mack-Cali Mid-Westchester Executive Park. Turn right at this junction. You are now on Skyline Drive and in a office-industrial complex of several buildings. Slowly follow this winding road to Building 6.

• At the end of the bridge, there is a toll, $3.00.
• About a mile after toll, I-87 and I-287 split. Stay on I-287 East.
• Stay to Right after split. Exit on first Right and follow signs for Saw Mill River Parkway North.
• After about 3 miles on Saw Mill Parkway, take Exit 25 for Hawthorne.
• Short exit ramp ends in light, at which make Left onto Route 9A North.
• Go to the first traffic light. Make Right at light onto Skyline Drive (Mack-Cali Mid-Westchester Corporate Park).
• Drive up the hill. At top of hill, make Left immediately after Red Metal Sculpture, then make immediate Right into Anvik's Parking lot.
• Anvik is Bldg. No. 6. You should see the sign in front of the building.

• Take I-90 (Mass. Turnpike) West.
• Take Exit for I-84 West and continue into Connecticut.
• Proceed on I-84 and take exit for I-684 South (after Danbury).
• Take Exit 5 for Saw Mill River Parkway South.
• Continue south and take exit for Sprain Brook Parkway South.
• Continue south and take exit for Route 100C - Eastview.
• At the top of the ramp, turn Right. You are now going west for a short distance (1/4 mile) on Rt. 100C (also called Grassland Rd).
• After the 2nd traffic light bear right and get on to Rt. 9A North.
• Go through one traffic light and immediately look on the right for IBM T.J. Watson Research Center sign and building (all glass, greenish, trapezoidal, tall blue pillar in the middle). There is also a sign here saying Mack-Cali Mid-Westchester Executive Park. Turn right at this junction. You are now on Skyline Drive and in a office-industrial complex of several buildings. Slowly follow this winding road to Building 6.

Directions under preparation

• Take I-95 South.
• A few miles after the NY border stay to the right and get on to I-287.
• Take Exit 3 for Sprain Brook Parkway.
• Take the Left Fork for the Sprain Brook Parkway North.
• Take exit for Route 100 C - Eastview. Turn left at top of exit ramp. You are now going west for a short distance (1/2 mile) on Rt. 100 C (also called Grasslands Rd).
• After the 3rd traffic light bear right and get on to Rt. 9A North.
• Go through one traffic light and immediately look on the right for IBM T.J. Watson Research Center sign and building (all glass, greenish, trapezoidal, tall blue pillar in the middle). There is also a sign here saying Mack-Cali Mid-Westchester Executive Park. Turn right at this junction. You are now on Skyline Drive and in a office-industrial complex of several buildings. Slowly follow this winding road to Building 6.

Directions under preparation

Directions under preparation